1 x 8-pin + 1 x 6-pin (The 1 x 3-pin is for RGB lighting control, not power). In other words the right part of the right connector is universal all-beveled design, so it can be used as the right part or as a (standalone) left part. PSU connectors and cables for graphics cards may be labeled as VGA or PCIe. or to up to two separate 4-pin sockets (each can strictly fit the left part of the right connector).to a single 8-pin socket (that can also strictly fit the left connector, this is what you want to do, I believe),.6-pin power connector can provide up to 75 watts. Specifically, there have been a several reports that the 16-pin 12VHPWR adapters (used to convert multiple 8-pin PCIe power connectors to the new ATX 3.0 standard) that provide the. By making the 4+4 part the way it is, they made it possible to connect the right connector: The PCI Express slot of the motherboard can provide up to 75 watts to the graphics card. If you need to connect an 8-pin socket to an 8-pin socket, it shouldn't matter though. The right connector (4+4) is the one you connect to the motherboard. The left connector (8) is the one you connect to the PSU. Refer to the user manual of your PSU to confirm this. The bottom pins are connected with black cables and are designed for GND. I guess the upper pins (the terms "upper", "lower", "left" and "right" refer to your original photo) are connected with yellow cables and are supposed to transmit +12V.
0 Comments
Leave a Reply. |